# Step 3: Shear Displacement and Tractions
% Meatadata extracted from parameter files
```{include} step03_sheardisptract-synopsis.md
```
## Simulation parameters
In Step 3 we replace the Dirichlet (displacement) boundary conditions on the +y and -y boundaries with equivalent Neumann (traction) boundary conditions.
In order to maintain symmetry and prevent rigid body motion, we constrain both the x and y displacements on the +x and -x boundaries.
The solution matches that in Step 2.
{numref}`fig:example:box:3d:step03:diagram` shows the boundary conditions on the domain.
The parameters specific to this example are in `step03_sheardisptract.cfg`.
:::{figure-md} fig:example:box:3d:step03:diagram
Boundary conditions for shear deformation.
We constrain the x and y displacements on the +x and -x boundaries.
We apply tangential (shear) tractions on the +y and -y boundaries.
:::
The tractions are uniform on each of the two boundaries, so we use a `UniformDB`.
In PyLith the direction of the horizontal tangential tractions in 3D are defined by the cross product of the +z direction and the outward normal on the boundary.
On the +y boundary a positive tangential traction is in the -x direction, and on the -y boundary a positive tangential traction is in the +x direction.
We want tractions in the opposite direction as shown by the arrows in {numref}`fig:example:box:2d:step03:diagram`, so we apply negative tangential tractions.
```{code-block} cfg
---
caption: Specifying the boundary conditions for Step 3. We only show the detailed settings for the -x and -y boundaries.
---
[pylithapp.problem]
bc = [bc_xneg, bc_xpos, bc_yneg, bc_ypos, bc_zneg]
bc.bc_xneg = pylith.bc.DirichletTimeDependent
bc.bc_xpos = pylith.bc.DirichletTimeDependent
bc.bc_yneg = pylith.bc.NeumannTimeDependent
bc.bc_ypos = pylith.bc.NeumannTimeDependent
bc.bc_zneg = pylith.bc.DirichletTimeDependent
[pylithapp.problem.bc.bc_xneg]
label = boundary_xneg
label_value = 10
constrained_dof = [0, 1]
db_auxiliary_field = spatialdata.spatialdb.SimpleDB
db_auxiliary_field.description = Dirichlet BC -x edge
db_auxiliary_field.iohandler.filename = sheardisp_bc_xneg.spatialdb
db_auxiliary_field.query_type = linear
[pylithapp.problem.bc.bc_yneg]
label = boundary_yneg
label_value = 12
db_auxiliary_field = spatialdata.spatialdb.UniformDB
db_auxiliary_field.description = Neumann BC -y edge
db_auxiliary_field.values = [initial_amplitude_tangential_1, initial_amplitude_tangential_2, initial_amplitude_normal]
db_auxiliary_field.data = [-9.0*MPa, 0*MPa, 0*MPa]
```
## Running the simulation
```{code-block} console
---
caption: Run Step 3 simulation
---
$ pylith step03_sheardisptract.cfg
# The output should look something like the following.
>> /software/unix/py39-venv/pylith-debug/lib/python3.9/site-packages/pylith/meshio/MeshIOObj.py:44:read
-- meshiopetsc(info)
-- Reading finite-element mesh
>> /src/cig/pylith/libsrc/pylith/meshio/MeshIO.cc:94:void pylith::meshio::MeshIO::read(topology::Mesh *)
-- meshiopetsc(info)
-- Component 'reader': Domain bounding box:
(-6000, 6000)
(-6000, 6000)
(-9000, 0)
# -- many lines omitted --
>> /software/baagaard/py38-venv/pylith-debug/lib/python3.8/site-packages/pylith/problems/TimeDependent.py:139:run
-- timedependent(info)
-- Solving problem.
0 TS dt 0.01 time 0.
0 SNES Function norm 2.854246293576e-02
Linear solve converged due to CONVERGED_ATOL iterations 1
1 SNES Function norm 2.511862662012e-17
Nonlinear solve converged due to CONVERGED_FNORM_ABS iterations 1
1 TS dt 0.01 time 0.01
>> /software/baagaard/py38-venv/pylith-debug/lib/python3.8/site-packages/pylith/problems/Problem.py:201:finalize
-- timedependent(info)
-- Finalizing problem.
```
The output written to the terminal is nearly identical to what we saw for Step 2.
The linear solve did require only 7 iteration to converge.
## Visualizing the results
In {numref}`fig:example:box:3d:step03:solution` we use ParaView to visualize the x displacement field using the `viz/plot_dispwarp.py` Python script.
As in Step 2 we override the default name of the simulation file with the name of the current simulation before running the `viz/plot_dispwarp.py` Python script.
```{code-block} python
---
caption: Set the simulation in the ParaView Python Shell.
---
>>> SIM = "step03_sheardisptract"
```
:::{figure-md} fig:example:box:3d:step03:solution
Solution for Step 3.
The colors of the shaded surface indicate the magnitude of the x displacement, and the deformation is exaggerated by a factor of 1000.
The undeformed configuration is show by the gray wireframe.
The solution matches the one from Step 2.
:::